Not to sound dense.. but why would you want to do this anyway? If you connect the camera to the computer directly (not a great idea anyway since you use up batteries on the camera and the speed is so much slower - better to use a card reader) and you don't move the photos to the PC first.. you run such a chance of losing your photos. The photos on that PC card are your originals.. you should move them to your PC first to ensure they don't get corrupt.

Ok.. with that out of the way.. you might need the add'l support file that came on the original CD (or perhaps you can find them at corel - they used to be on JASC.com)... See these instructions here:

Obtaining and Installing Direct Digital Camera Support

Paint Shop Pro provides direct support for many popular digital cameras. A separate installation program for this support is included with the CD-ROM version of Paint Shop Pro. This installation program is also available for download from our Web site at www.jasc.com for customers who purchased the electronic download version of Paint Shop Pro. A list of supported cameras is also available at this location.

The CD-ROM version of Paint Shop Pro will create a Start Menu shortcut for the digital camera support installer in the Jasc Software\Utilities folder during program installation.

To install direct digital camera support, proceed as follows:

1. If you purchased an electronic download version of Paint Shop Pro, download the Jasc Software Digital Camera Support setup program.

2. Run the camera installation program by selecting the "Jasc Digital Camera Support" shortcut in the Jasc Software\Utilities folder of the Start Menu (CD-ROM version) or double clicking on the file you downloaded in step 1.

3. Select the appropriate camera from the list of available devices. By default, no cameras are selected in the setup program. To select the desired camera, click on the disk icon to display a menu of available installation options, then click the "This feature will be installed on local hard drive" option.

4. The installation program will install the necessary files for accessing the selected camera(s) and close after the installation is complete.

5. Once the desired support is installed, you can configure and access the camera using the Import>Digital Camera commands on Paint Shop Pro's File menu.